Description

INTREPID^TM System Controllers conveniently and reliably manage all INTREPID^TM Series II perimeter detection systems - MicroPoint^TM II and MicroNet^TM II Fence Detection Systems, MicroTrack^TM II Buried Cable Detection System and MicroWave 330 Digital Microwave Link. Control modules also incorporate and operate contact-closure auxiliary security devices and interface with assessment equipment (CCTV/DVR) or other system outputs.

INTREPID^TM System Controllers facilitate the assignment of alarm inputs to specific perimeter segments - or zones - of desired lengths. For added flexibility, multiple sensor technologies can be assigned to a single zone. Zones may be associated with specific outputs - such as camera presets - so that when a perimeter breach is detected, precise visual assessment is achieved.

INTREPID controllers seamlessly integrate all Series II devices via a common, open architecture communications protocol using standard RS422 serial data interface. Communication connections may be made via copper wire, fiber optic cable or TCP/IP (CM II-N, PSM II, IPP II, RPM II).

SDK options are available to developers for high-level interface of INTREPID^TM Series II sensors into custom monitoring and control applications: INTREPID^TM Polling Protocol II (IPP II) and Remote Polling Module II (RPM II).

GRAPHIC CONTROL MODULE II-HD (GCM II-HD)

The INTREPID^TM Graphic Control Module II-HD (GCM II-HD) is a dedicated, Linux-based graphic system controller designed to provide large or multi-site facilities with local GUI-based alarm monitoring and control of INTREPID^TM Series II devices, contactclosure auxiliary security devices and CCTV equipment. The GCM II-HD is supplied as a self-contained module, including system hardware and application software with graphic mapping capabilities for robust system configuration and management.

The GCM II-HD features a user-friendly GUI that allows system operators to efficiently manage their facility's perimeter security program by incorporating a high-resolution site map to display detection zones and active icons representing each system device.

The GCM II-HD functions as system Pollmaster - polling all INTREPID^TM devices connected to its Communications port for status. When an intrusion attempt is detected from any INTREPID^TM device or auxiliary input, its precise location is displayed on the graphic map and a command is issued to the appropriate output(s).

REMOTE POLLING MODULE II (RPM II)

The Remote Polling Module II (RPM II) is an INTREPID^TM System Controller designed to provide network-based large or multi-site facilities with simplified high-level integration (via SDK) between a third-party control or monitoring systems and INTREPID^TM Series II sensors and auxiliary devices.

The RPM II is a self-contained hardware module with accompanying Software Development Kit (SDK) that eliminates the need for direct polling of each INTREPID^TM device by the third-party head-end system, reducing time, cost and complexity associated with interface development. The RPM II serves as Pollmaster - polling all INTREPID^TM Series II sensors and auxiliary devices connected to its communications port for status, and communicating this information to the third-party control or monitoring system via TCP/IP network connection.

CONTROL MODULE II-N (CM II-N)

The CM II-N is a System Controller designed to provide midsized facilities with robust local or remote control of INTREPID^TM Series II sensors, contact-closure auxiliary security devices and CCTV monitoring equipment. It is supplied as a self-contained, fully-hardened module and features intuitive, software-based system configuration, zone assignment and management. The CM II-N supports TCP/IP network connection to enable remote configuration and maintenance of Series II sensors.

The CM II-N functions as system Pollmaster - polling all INTREPID^TM devices connected to its Communications port for status. When an intrusion attempt is detected from any INTREPID^TM device or auxiliary input, a command is issued to the appropriate local relay output(s). The CM II-N also supports remote alarm monitoring via TCP/IP network connection using ROM II-16-N relay output modules.

RELAY CONTROL MODULE II (RCM II)

The Relay Control Module II (RCM II) is a fully-hardened INTREPID^TM System Controller designed to provide smaller facilities with cost-effective local control of INTREPID^TM Series II devices, contact-closure auxiliary security devices and CCTV equipment. The RCM II functions as system Pollmaster - polling all connected INTREPID^TM Series II devices connected to its Communications port for status. When an intrusion attempt is detected from any INTREPID^TM device or auxiliary input, a command is issued to the appropriate relay output(s).

PERIMETER SECURITY MANAGER II (PSM II)

Perimeter Security Manager II (PSM II) is an advanced, Windows®-based security monitoring and control software package designed to provide large or multi-site facilities with local or remote GUI-based alarm monitoring and control of INTREPID^TM Series II sensors and contact-closure auxiliary security devices. PSM II also facilitates high level interface to CCTV equipment, incorporating live video and multilayer graphic maps on a single display.

INTREPID^TM SOFTWARE DEVELOPMENT KITS (SDK)

Two Software Development Kits (SDK) are available for high-level integration between INTREPID^TM Series II devices and custom monitoring and control applications. Depending on system design parameters, each provides a unique method for third-party systems to interface with INTREPID^TM Series II sensors and auxiliary devices.

INTREPID Polling Protocol II (IPP II) SDK: With this application-layer protocol, specific to serial line communications, each INTREPID^TM module is queried separately by the third-party control or monitoring application.

Remote Polling Module II (RPM II) SDK: With this application-layer protocol / hardware combination, specific to TCP/IP IPv4 socket communications, an RPM II System Controller is queried by the control or monitoring application. By eliminating the need for direct polling of each INTREPID^TM device by the head-end system, the RPM II SDK reduces interface development time, cost and complexity. Requires an RPM II System Controller, which handles polling of individual INTREPID^TM Series II sensors and auxiliary devices. Provides secondary relay output interface (128 zones).